Riveting l Riveting Tools l Avro 5X-7X-9X

Riveting Tools l Avro 5X-7X-9X    

The Avro “Wolfpack” series of riveting hammers feature a revolutionary piston design that delivers far more power and assists in absorbing vibration, allowing the operator to choose a smaller and lighter tool for the same application.
The “Ergonomic” housing is designed for maximum operator comfort and the “Ergo Grip” which acts as a thermal protector and helps isolate vibration, are both standards in these tools. A spool valve system delivers slow, heavy blows necessary to drive rivets. An extremely sensitive teasing throttle permits precise control.


Model
Capacity
Blows/minute
Bore & Stroke
Length
Weight
Alu/steel
in / mm
in / mm
lb / kg
WP500 Rivet Hammer 5X .401 Shank Diameter
10020
1/8" / 3/32'
2600
1/2" x 2-1/4" / 12.7 x 57.2
6-11/16' / 170
2-1/4 / 1.0
(3.2mm / 2.4mm)
WP700 Rivet Hammer 7X .401 Shank Diameter
10030
3/16" / 5/32"
2100
1/2" x 2-7/8" / 12.7 x 73.0
7-5/16" 185
2-5/16 / 1.3
(4.8mm / 4.0mm)
WP900 Rivet Hammer 9X .401 Shank Diameter
10040
1/4' / 3/16"
1700
1/2" x 3-1/16" / 12.7 x 77.8
8-5/16" / 211
2-3/4 / 1.3
(6.4mm / 4.8mm)


Standard Equipment:

Special quick change retainer #92010
General:
Air Inlet 1/4” NPT Standard
1/4” BSP (Europe) ADD-E to part number; eg: 10055E
Use 5/16” (8mm) I.D Hose
All tools rated at 90 psi (620 KPA) air pressure.
Safety Precaution: Read and follow all safety operating instructions.
WARNING: Excessive or improper use may result in carpal tunnel syndrome (”White Finger”) disease.
Face and eye protection must be worn while operating power Tools, per ANSI B186.1